德国pepperl+fuchs倍加福P+F安全栅隔离器KFU8-UFC-EX1.D
一般特性供电输入输出Transfer characteristics指令符合Conformity周围环境机械特性Data for application in connection with Ex-areasInternational approvals
Signal type 模拟量输出
连接器 Power Rail or terminals 9+, 10-
额定电压 19 ... 30 V DC
纹波 ≤ 10 %
额定电流 ≤ 30 mA
功耗 ≤ 600 mW
功耗 ≤ 700 mW
连接器 terminals 5-, 6+
输入信号 4 ... 20 mA limited to approx. 30 mA
电压降 depending on switch configuration
open loop voltage of the control system < 23 V: approx. 6 V at 20 mA
open loop voltage of the control system < 27 V: approx. 10 V at 20 mA
输入电阻 > 100 kΩ, with field wiring open
连接器 端子 1+,2-
电流 4 ... 20 mA
负载 0 ... 650 Ω
电压 ≥ 13 V at 20 mA
纹波 20 mV rms
偏差 at 20 °C (68 °F), 0/4 ... 20 mA
≤ ± 0.1 % incl. non-linearity and hysteresis
频率范围 field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
上升时间 10 to 90 % ≤ 100 ms
电磁兼容性
Directive 2004/108/EC EN 61326-1:2006
电磁兼容性 NE 21
防护等级 IEC 60529
环境温度 -20 ... 60 °C (-4 ... 140 °F)
防护等级 IP20
重量 approx. 100 g
外形尺寸 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 in) , housing type A2
安装 on 35 mm DIN mounting rail acc. to EN 60715:2001
EC-类型 鉴定证书 CESI 06 ATEX 021 , for additional certificates see www.pepperl-fuchs.com
保护型号、类别、组别 Ex-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I
符合标准 PF 06 CERT 0973 X
Group, category, type of protection, temperature class Ex-Hexagon II 3G Ex nA IIC T4 Gc
指令符合
94/9/EC 指令 EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006 , EN 50303:2000
FM认证
控制图 16-533FM-12 (cFMus)
UL认证
控制图 16-533FM-12 (cULus)
IECEx approval IECEx CES 06.0001
Approved for
[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
